GE Pegasus MHV GEEP-427-I Instuctions page 14

Horizontal induction motor totally enclosed water-to-air cooled sleeve bearing
Hide thumbs


prevent the entrance of moisture, dust, and conducting
particules. The gasketed cover should also be closed for
electrical safety, except when required to perform
connection work inside the box.
GE Energy Motors GEEP-427-I
GEEP-427-I Pegasus, Horizontal Induction Motor
Two stainless-steel, grounding pads are supplied
on the frame. One at each end near the foot. A pair of
drilled and tapped holes, with NEMA spacing and size
1/2-13, are provided in each grounding pad. One
additional stainless-steel, grounding pads are supplied
inside the power terminal box in the region of the throat
connection between the power terminal box and the
frame. These pads are used for connection of ground
leads, cable shield, etc., as may be required. These
grounding pads are also drilled and tapped as described
above. The machine should be grounded in accordance
with the National Electric and consistent with sound
local practices.
Copyright 2009, The General Electric Company, USA
TEWAC, Sleeve Bearing



  Related Manuals for GE Pegasus MHV GEEP-427-I

Table of Contents