External Component Operations; Playing An External Compoenent - JVC GET0291-001A Instructions Manual

Cd receiver
Table of Contents

Advertisement

EXTERNAL COMPONENT OPERATIONS

Playing an external component
You can connect the external component to the
CD changer jack on the rear using the Line Input
Adapter KS-U57 (not supplied).
Preparations:
• For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the
following procedure, select the external input
correctly. See "To select the external component to
use—EXT IN" on page 23.
1
Select the external component
(LINE IN).
• If "LINE IN" does not appear on the display, see
page 23 and select the external input ("LINE IN").
Note on One-Touch Operation:
When you press CD CD-CH, the power automatically
comes on. You do not have to press
on the power.
2
Turn on the connected component
and start playing the source.
3
Adjust the volume.
4
Adjust the sound as you want.
(See pages 20 and 21.)
to turn
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Get0291-002aKd-g456Kd-g456ab

Table of Contents