Table of Contents
Advertisement
Other external component
operations
You can connect an external component to the AUX
(auxiliary) input jack on the control panel.
Portable audio player,
etc.
~
Ÿ
Turn on the connected component and
start playing the source.
!
Adjust the volume.
⁄
Adjust the sound as you want.
(See pages 11 and 12.)
To check the clock time while listening to an
external component
AUX IN
Stereo mini plug
(not supplied)
Ô
Clock
Maintenance
How to clean the connectors
Frequent detachment will deteriorate the connectors.
To minimize this possibility, periodically wipe the
connectors with a cotton swab or cloth moistened with
alcohol, being careful not to damage the connectors.
Connectors
Moisture condensation
Moisture may condense on the lens inside the unit in
the following cases:
• After starting the heater in the car.
• If it becomes very humid inside the car.
Should this occur, the unit may malfunction. In this
case, eject the disc and leave the unit turned on for a
few hours until the moisture has evaporated.
How to handle discs
When removing a disc from its
case, press down the center holder
of the case and lift the disc out,
holding it by the edges.
• Always hold the disc by the edges.
Do not touch its recording surface.
When storing a disc in its case, gently insert the
disc around the center holder (with the printed surface
facing up).
• Make sure to store discs in cases after use.
To keep discs clean
A dirty disc may not play correctly.
If a disc does become dirty, wipe it with
a soft cloth in a straight line from center
to edge.
• Do not use any solvents (for example,
conventional record cleaner, spray, thinner, benzine,
etc.) to clean discs.
Center holder
Continued on the next page
15
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
