JVC 0708DTSMDTJEIN Instructions & Installation Manual page 41

Cd receiver
Table of Contents

Advertisement

Indications
DEMO
Display demonstration
CLK DISP *
1
Clock display
CLOCK H
Hour adjustment
CLOCK M
Minute adjustment
24H/12H
Time display mode
CLK ADJ *
2
Clock adjustment
AF-REG *
2
Alternative frequency/
regionalization
reception
PTY-STBY *
2
PTY standby
*
1
If the power supply is not interrupted by turning off the ignition key of your car, it is recommended that you select
"OFF" to save the car's battery.
*
Only for FM Radio Data System stations.
2
Item
Selectable settings, [reference page]
(
: Initial)
• DEMO ON
: Display demonstration will be activated automatically if no
operation is done for about 20 seconds, [5].
• DEMO OFF
: Cancels.
• ON
: Clock time is shown on the display at all times when the power is
turned off.
• OFF
: Cancels; pressing DISP will show the clock time for about
5 seconds when the power is turned off, [5].
0 – 23 (1 – 12)
[Initial: 0 (0:00)], [5].
00 – 59
[Initial: 00 (0:00)], [5].
• 24H
: See also page 5 for setting.
• 12H
• AUTO
: The built-in clock is automatically adjusted using the CT (clock
time) data in the Radio Data System signal.
• OFF
: Cancels.
• AF
: When the currently received signals become weak, the unit
switches to another station (the programme may differ from the
one currently received), [9, 16].
• The AF indicator lights up.
• AF REG
: When the currently received signals become weak, the unit
switches to another station broadcasting the same programme.
• The AF and REG indicators light up.
• OFF
: Cancels.
OFF, PTY codes
Activates PTY Standby Reception with one of the PTY codes, [9].
Continued on the next page
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Get0582-001aKd-r200

Table of Contents