Download Print this page

Radio Operations; External Component Operations; Cleaning - JVC KD-R210 Instructions & Installation

Cd receiver
Hide thumbs Also See for KD-R210:

Advertisement

OPERATIONS
Basic operations
Remote sensor
Control panel
DO NOT expose to strong light.
• Turn on the power.
• Turn off the power [Hold].
• Attenuate the sound (if the
power is on).
Detach the panel.
Select the source.
Display window
• Source display
• Track number
Playback mode indicator
• Folder number
Disc indicator
(for MP3/WMA discs)
• Volume level indicator
• Time countdown indicator
Tr (track) indicator
Remote controller—RM-RK50
• Turns the power on if pressed briefly or
attenuates the sound when power is on.
• Turns the power off if pressed and held.
5
• Changes the FM/AM bands with
U.
• Changes the preset stations with D
.
• Changes the folders of MP3/WMA discs.
• Adjusts the volume level.

Radio operations

Select "FM/AM."
Select the bands.
Search for a station—Auto Search.
Manual Search: Hold either one of the buttons until "M" flashes on the display, then press it repeatedly.
When an FM stereo broadcast is hard to receive
Reception improves, but the stereo effect will be lost.
• MO indicator lights up.
To restore the stereo effect, repeat the same procedure.
FM station automatic presetting —SSM (Strong-station Sequential Memory)
You can preset six stations for each band.
Manual presetting
Example: Storing the FM station of 92.5 MHz into preset number 4 of the FM1 band.
MAINTENANCE
How to clean the connectors
Wipe the connectors with
a cotton swab or cloth
moistened with alcohol.
Connectors
Moisture condensation
Moisture may condense on the lens inside the unit. Eject
the disc and leave the unit turned on for a few hours until
the moisture has evaporated.
Check the current clock time/other information.
See also "CLK DISP" of "General settings—PSM."
Volume control.
• MO: Lights up in monaural mode.
• ST: Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
Disc information indicators
Main display (time,
LOUD (loudness)
playback information)
indicator
• Selects the sound mode
(iEQ: intelligent equalizer).
• Selects the source.
• Searches for stations if pressed briefly.
• Fast-forwards or reverses the track if
pressed and held.
• Changes the track of the disc if pressed
briefly.
Select preset station.
5
• You can also use
/
to select preset station.
To keep discs clean
Wipe in a straight line from center of disc to
edge. Do not use liquid cleaners, thinners, or
benzene.
To play new discs
Remove any rough areas from the inner and
outer edges of the disc.
Disc operations
Eject disc.
• Press SRC to
listen to another
playback source.
4
¢
/
[Press] Go to the next or previous track.
[Hold] Fast-forwards or reverses the track.
5
/
: Go to the next or previous folder
(for MP3/WMA discs).
Turn on the power.
Insert disc.
All tracks will be played repeatedly until you change the source or eject the disc.
Selecting the playback modes
After pressing M MODE, press the following buttons to...
TRK RPT : Plays the current track
repeatedly.
FLDR RPT* : Plays all tracks of the current
folder repeatedly.
RPT OFF
: Cancels.
FLDR RND* : Plays all tracks of the current
folder, then the tracks of the
next folder at random.
ALL RND : Plays all tracks of the current
disc at random.
RND OFF : Cancels.
* Only for MP3/WMA.
Skipping a track quickly during play
• For MP3/WMA disc, you can skip a track within the
same folder.
Example: Select track 32

External component operations

You can connect an external component to the AUX (auxiliary) input jack on the control panel.
Turn on the connected
component and start
playing the source.
Stereo mini plug (not supplied)
Do not use the following discs:
Single CD—8 cm (3-3/16") disc
Unusual shape
C-thru Disc (semi-transparent disc)
2– EN
[Press] Select track (for CD) or folder* (for MP3/
WMA) number (01 – 06).
[Hold] Select track (for CD) or folder* (for MP3/
WMA) number (07 – 12).
* Folders are required to assigned with 2-digit
numbers at the beginning.
Changing the display information
While playing an audio
While playing an MP3 or
CD or CD Text
a WMA disc
: Clock with the current track number
: The elapsed playing time with the current track
number
*
1
If the current disc is an audio CD, "NO NAME" appears.
*
2
If an MP3/WMA file does not have tags or "TAG DISP" is
set to "TAG OFF," folder name and file name appear.
Prohibiting disc ejection
You can lock a disc in the loading slot.
To cancel the prohibition, repeat the same procedure.
Portable audio player, etc.
Warped disc
Sticker and sticker residue
Transparent or semi-transparent
parts on its recording area
Stick-on label

Hide quick links:

Advertisement

loading

This manual is also suitable for:

0809dtsmdtjeinGet0621-001a