Table of Contents
Advertisement
3-2 Installation Method
• LM ADAPTER is not waterproof type.
• LM ADAPTER shall be installed in a control panel box (steel : thickness 1 mm (3/64 in) or more).
Please prepare the control panel box in consideration with installation space as shown in the Fig.
(Install in an area capable of withstanding a 3.4 kg (7 1/2 lb) load.)
The unit shall be also installed in vertical direction only indicated by arrow making on the cover as shown in the
Fig.
• Use M4 screws as shown in Fig. below to fix the product.
To prevent the product from falling, make sure to fix at four places.
20
(13/16)
UP
6
Installation space
20
(13/16)
Unit : mm (in)
Advertisement
Table of Contents
Troubleshooting
