Dell PowerEdge M1000e Getting Started Manual page 5

Dell poweredge blade servers getting started guide

Hide thumbs Also See for PowerEdge M1000e:

Table of Contents

Figure 4. Installing a Half-Height Blade

NOTE: The above figure shows installation of a half-height blade. The procedure for installing a full-height blade is

identical to installing a half-height blade.

Beginning at the top, slide the blades into the enclosure from left to right. When the blade is securely installed, the blade

handle returns to the closed position.

Connecting The CMC And iKVM Modules

Figure 5. Connecting the Modules

Connect the serial cable and network cable(s) from the management system to the CMC module. If a second optional

CMC module is installed, connect it as well.

Connect the keyboard, mouse, and monitor to the optional iKVM module.

Table of Contents