Display" Menu Screen - JVC Studio Kit KA-F5602U Instructions Manual

Menu Screen

"DISPLAY" Menu Screen

Additional new "DISPLAY" menu screens are added.
The settings in bold are factory settings.
Item
"CHARACTER"
"F NO."
"SAFETY ZONE"
"CENTER MARK"
"TALLY"
22
To select whether characters will be displayed in the viewfinder.
"OFF" : Characters will not be displayed.
"ON" : Characters will be displayed.
Whether to display characters could be selected
individually at the next item.
Even if this item is set to "ON", no character will be displayed if
the individual character item is set to "OFF".
To select whether to display the lens iris F value on the view-
finder.
"OFF" : Will not be displayed.
"ON" : Will be displayed.
To select whether to display safety zone and its style on the view-
finder.
"OFF" : Will not be displayed.
"NORMAL" : Safety zone with aspect ratio of 4:3 will be displayed.
"16:9" : Safety zone with aspect ratio of 16:9 will be displayed.
To select whether to display the centre mark when the display of
safety zone has been selected.
"OFF" : Will not be displayed.
"ON" : Will be displayed.
To select whether viewfinder [TALLY] lamp will be turned on when
signal is applied to the [TALLY] terminal located at the rear of the
Remote Control Unit RM-P210.
"OFF" : Lamp will not be turned on.
"ON" : Lamp will be turned on.
Function/Variables