Audio Dubbing Using Digital Sound Effects - JVC LYT0844-001A Instructions Manual

Display
6e
D.SOUND
APPLAUSE
MENU Button
INDEX Button
SET/SELECT
Button

Audio Dubbing Using Digital Sound Effects

Audio Dub
Standby mode
1
2
Sound effect
indication
3
4
+, – Button
5
6
D.SOUND Button
7
NOTES:
PLAY
PAUSE
STOP
Load the provided memory card (
perform step 1 and 2 of page 66.
Press MENU. The Menu Screen appears.
Press + or – to select "
SELECT. The SYSTEM Menu appears.
Press + or – to select "SOUND IN" and press SET/
SELECT. The Sub Menu appears. Press + or – to
select "D.SOUND" and press SET/SELECT. Press +
or – to select " RETURN", and press SET/SELECT
twice. The Menu Screen closes and the sound effect
indication appears.
Press INDEX to access the sound effects Index
Screen. Press + or – to select the desired sound
effect and press SET/SELECT.
Press PLAY (4) to begin Audio Dubbing. The
selected sound effect is dubbed onto the tape.
•The " " moves while it is being dubbed.
•To stop dubbing the sound effect midway, press
D.SOUND.
Press STOP (5) to end Audio Dubbing.
After dubbing, set "SOUND IN" back to "MIC".
The dubbed sound effect is recorded on SOUND 2
( pg. 46).
If you press PAUSE ( 6 ) to pause dubbing in step 6 the
selected sound effect indication remains displayed. To
resume dubbing, press PLAY ( 4 ).
67
EN
pg. 16) and
SYSTEM" and press SET/