Panasonic KX-NCP500 User Manual page 29

Button
Cleaned-up
Primary Directory Number
(PDN)
Secondary Directory Number
(SDN)
How to Follow the Steps
An example of system operation is shown below.
Calling Another Extension
To call an extension (Intercom Call)
PT/SLT/PS/SIP Extn. PT and SLT
Off-hook. Dial extension number
or press DSS.
The DSS button light shows the current status as follows:
Off: The extension is idle.
Red on: Your or another extension is using the line.
To call using a directory, refer to "1.13.2 Using the Directories".
For quick operation
If you are an operator or dial some extensions frequently, DSS buttons are useful.
Hands-free Operation
You can make an intercom call and have a conversation in hands-free mode using the SP-
PHONE button.
Customising Your Phone
3.1.2 Settings on the Programming Mode—Preferred Line Assignment—Outgoing
Select the seized line when going off-hook.
3.1.3 Customising the Buttons
Create or edit a Direct Station Selection (DSS) button.
Used to switch the room status of extensions between Ready and Not
Ready.
Used to make and receive both outside and intercom calls.
Used to show the current status of another extension, call the extension,
and pick up or transfer calls to it.
extension no.
OR
(DSS)
Talk.
Programming References: The related or required programming is noted.
1.1.1 Before Operating the Telephones
Feature
Feature title
Operation steps
The description of the
icons are explained on
"Icon Descriptions".
Conditions
Hints
User Manual 29