Customising The Buttons - Panasonic KX-NCP500 User Manual

3.1.3 Customising the Buttons

3.1.3 Customising the Buttons
You can customise the flexible buttons and/or programmable feature (PF) buttons on PTs, Add-on Key
Modules, and PSs. They can then be used to make or receive outside calls or as feature buttons.
•
To enter the programming mode when using a PS, refer to "Operating Instructions" for PS.
•
The buttons in the table below can only be set on certain flexible buttons, as follows:
–
–
–
To enter the programming mode
PROGRAM
OR
PAUSE
Press PROGRAM
or PAUSE.
Button
Loop-CO (L-CO)
Group-CO (G-CO)
Single-CO (S-CO)
Direct Station Selection
(DSS)
One-touch Dialling
Incoming Call Distribution
Group (ICD Group)
Message
Message for Another
Extension
Call Forwarding (FWD)/Do
Not Disturb (DND)—Both
calls
FWD/DND—Outside calls
FWD/DND—Intercom calls
Group FWD—Both calls
224 User Manual
Flexible buttons on PTs/Add-on Key Modules/PSs: all buttons can be set.
Flexible buttons on DSS Consoles: all buttons except CTI and Primary Directory Number
(PDN) buttons can be set.
Programmable feature (PF) buttons: only the One-touch Dialling button can be set.
Press desired
flexible button.
# + Outside line group no. (2 digits)
0 + Outside line no. (3 digits)
1 + Extension no.
2 + Desired no. (max. 32 digits)
*1
*²
3 0
#
+ delayed ringing time [0–7])
4 0
4 0
extension no.
4 1
4 2
4 3
4 4
To programme
To continue
programming
input
AUTO DIAL
Follow
Press ENTER
programming input.
or STORE.
Programming Input
+ Incoming call distribution group extension no. (+
+ Extension no./Incoming call distribution group
+ Incoming call distribution group extension no.
To exit
PROGRAM
OR
OR
PAUSE
STORE
Press PROGRAM
or PAUSE.
*3