Table of Contents
Advertisement
Manual Recording
24
EN
About manual recording mode
This mode enables you to set the focus and
screen brightness manually. You need to switch
to this mode because auto recording mode,
which adjusts these settings automatically, is
selected by default.
To change to manual recording mode
Preparation:
Set the power switch to
Select the file type (video or still image) using
the MODE switch.
Press twice.
The
indicator appears.
To return to the auto recording mode
Press the AUTO button so that the
appears.
Controls in this section
Power Switch
/
/
/
/ 49
.
16:9
indicator
MODE Switch
AUTO
Manual Focus
The camera's Full Range AF system offers
continuous focusing ability from close-up to
infinity. However, the correct focus may not be
obtained, depending on the shooting condition.
In this case, use the manual focus mode.
After performing "To change to manual
recording mode" (
1
The
indicator appears.
2
Focusing on a distant subject
Focusing on a close subject
If you want to fix the focus, press 49 after
selecting the correct focus.
To cancel manual focus
Press 49 so that the
disappears.
Nightscope
The shutter speed is automatically adjusted
from 1/2 to 1/30 seconds. It enables recording
with low light levels in dim locations.
After performing "To change to manual
recording mode" (
The
indicator appears.
To cancel nightscope
Press
(NIGHT) so that the
disappears.
NOTE:
It is recommended to use the tripod (
when recording with a slow shutter speed.
pg. 24)
16:9
[0h56m]
indicator
pg. 24)
16:9
indicator
pg. 16)
Hide quick links:
Advertisement
Table of Contents
