Appendix; Troubleshooting - Brother P-touch 1600 User Manual

Brother label printer p-touch user's guide
Hide thumbs Also See for P-touch 1600:
Table of Contents

Advertisement

Available languages

Available languages

6
6

Appendix

Troubleshooting

1
The display stays blank after you
have turned on the machine.
2
The machine does not print or the
printed characters are blurred.
3
The text files that you stored in
the memory are no longer there.
4
The printed characters are not
formed properly.
5
A blank horizontal line appears
through the printed label.
6
Striped tape appears.
7
The P-touch has "locked up" (i.e.,
nothing happens when a key is
pressed).
58
Problem
Solution
Check that the AC adapter
(model AD-60/AD-24) is
connected correctly.
If you are using batteries, check
that they are correctly inserted.
If the batteries are low, replace
them with new ones.
Check that the back cover has
been properly attached.
If the tape cassette is empty,
replace it with a new one.
If the batteries are low, replace
them with new ones.
If you are using batteries, they
may have a low charge. Try using
the AC adapter or replace the
batteries with new ones.
Clean the print head as explained
on Cleaning the print head,
rollers and tape cutter on page 8.
You have reached the end of the
tape. Replace the tape cassette
with a new one.
Turn off the P-touch, and then
while holding down g and
R, turn the machine back on.
The machine will restore, but the
text and formats shown in the
display and all text files stored in
the memory are erased.

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

P-touch 1650

Table of Contents