Philips SimplyGo User Manual page 18

2. Continuous Flow Mode Screen
In Continuous Flow operating mode, a constant flow of oxygen is sup-
plied based on the setting number (in liters per minute):
• .5 LPM
• 1 LPM
• 1.5 LPM
• 2.0 LPM
3. Sleep Mode Screen
The Sleep operating mode is similar to the Pulse Mode� The device
detects when the user begins to take a breath using a more sensitive
detection level� The SimplyGo then delivers a pulsed volume of oxygen
determined by the setting number� During inhalation, a low amplitude
and longer pulse duration is used to make sleeping more comfortable� If
no breath is detected for a period of time, the system automatically deliv-
ers a continuous flow of oxygen at a rate consistent with the last used
Continuous Flow Mode setting.
Selecting the Operating Modes
You can use the Mode button (M) to select the device operating mode�
To select your operating mode:
1� Press the Mode button�
Note: If the device is operating and the screen is dark, the first press turns on
the screen backlight� In this case, press the button a second time to
select the mode�
SimplyGo User Manual
15