Make Connections - JVC GR-FX12 Instructions Manual

Compact vhs camcorder
Hide thumbs Also See for GR-FX12:
Table of Contents

Advertisement

To S-Video
output
connector
S-Video
A/V
cable
cable
"Y/C"/"CVBS"
video out
select switch
VCR
TV
* Connect when an S-Video cable is not used.
To
J terminal
(JLIP)
Open
the cover.
To Video* output
and Audio output
connectors
Editing cable
(ø3.5 mini-plug
cable) (optional)
To AUDIO
(L/MONO),
VIDEO* and
-IN connectors
If your VCR has the
SCART connector,
use the cable adapter.
To Remote
PAUSE
To PAUSE-IN
RM-V700U
(optional)

MAKE CONNECTIONS

NOTE:
Set "VIDEO OUT" of the camcorder according to the
system of the VCR you will be using (
1
JVC VCR EQUIPPED WITH REMOTE
PAUSE TERMINAL
Connect the editing cable to the Remote PAUSE
terminal.
JVC VCR NOT EQUIPPED WITH REMOTE
PAUSE TERMINAL BUT EQUIPPED WITH
R.A. EDIT CONNECTOR
Connect the editing cable to the R.A.EDIT
connector.
VCR OTHER THAN TYPE
Connect the editing cable to the RM-V700U's
PAUSE-IN connector.
2
Insert a recorded tape into the camcorder and set the
Power Switch to "
3
Turn the VCR power on, insert a recordable tape and
engage the AUX mode (refer to the VCR's
instructions).
NOTES:
If your VCR has an S-Video input connector or a SCART
connector compatible with Y/C signals, connect the
camcorder and the VCR using the provided S-Video
cable. This can improve the dubbed picture quality.
If you use the cable adapter, set the "Y/C"/"CVBS" video
out select switch as required.
Y/C
: When connecting to a VCR which accepts Y/C
signals and uses an S-Video cable.
CVBS : When connecting to a VCR which does not
accept Y/C signals and uses an A/V cable.
If you are using a SECAM VCR, set "VIDEO OUT" to
"SECAM" (
pg. 9).
EN
pg. 9).
OR
".
CONTINUED ON NEXT PAGE.
41

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents