Automatic Demonstration; Provided Accessories - JVC GR-FX12 Instructions Manual

4
EN
Automatic Demonstration takes place when "DEMO MODE" is set to "ON"
(factory-preset).
Available when the Power Switch is set to "
Operating the Power Zoom Lever during the demonstration stops the
demonstration temporarily. If the Power Zoom Lever is not moved for
more than 1 minute after that, the demonstration will resume.
"DEMO MODE" remains "ON" even if the camcorder power is turned
off.
To cancel Automatic Demonstration, set the Power Switch to " " and
press MENU while the demo is in progress. This takes you directly to the
demo mode's Setting Menu (so you will not have to go through the main
Menu Screen). Rotate MENU to select "OFF" and press it.
NOTE:
When a tape whose Erase Protection tab is in the position that allows recording is loaded in the
camcorder, demonstration is not available.
•Remote Control Unit RM-V715U
(GR-SXM607/SXM57/SX202
only)
•Battery Pack
BN-V11U (GR-FXM37/FX12)
BN-V20U (GR-SXM607/SXM57/
SXM47/SX202/SX22)
•AAA (R03) Battery x 2
(for Remote Control Unit,
GR-SXM607/SXM57/SX202 only)
•Lens Cap

AUTOMATIC DEMONSTRATION

PROVIDED ACCESSORIES

• AC Adapter
AP-V10EG
• Power Cord
" or " ".
DEMO MODE
O F F
O N
E X I T
Setting Menu
• Shoulder Strap
•Cable Adapter
(with an -IN connector)
(GR-SXM607/SXM57/SXM47/
SX202/SX22 only)
• Cable Adapter
(without an -IN connector)
(GR-FXM37/FX12 only)
• Core Filter x 3
(for provided A/V Cable
and AC Adapter,
GR-FXM37/FX12 only)
• Core Filter x 4
(for provided A/V Cable,
S-Video Cable and AC Adapter,
GR-SXM607/SXM57/SXM47/
SX202/SX22 only)
•A/V (Audio/Video) Cable
•S-Video Cable
(GR-SXM607/SXM57/
SXM47/SX202/SX22
only)