Playback Zoom; Animation And Time-Lapse - JVC GR-FX12 Instructions Manual

Remote sensor
ZOOM (T/W)
PLAY
STOP
RM-V715U
Display
1 M I N
1 / 2 S
Remote sensor
START/STOP
INT. TIME
REC. TIME
RM-V715U OR

Playback Zoom

To magnify the recorded image up to 10X at any time
during playback.
NOTES:
Use the RM-V715U remote control unit to perform this
procedure.
Make sure that the TBC mode is activated (
1) Press PLAY to find the scene of interest.
2) Press the ZOOM Buttons (T/W) on the remote control.
Make sure the remote control is pointed at the
camcorder's remote sensor. Pressing T zooms in.
To End Zoom . . .
.... press and hold W until magnification returns to
NOTES:
Zoom can also be used during still playback.
Due to digital image processing, the quality of the image
may suffer.
After zooming in on a still video image, when normal
playback is started, the zoomed-in effect is momentarily
cancelled but then resumes, returning magnification to
the previously set level.

Animation and Time-Lapse

The remote control lets you set/release Interval Time and
Recording Time without using the Menu Screen.
Interval time
indicator
Animation
1) Set
Recording time Instead of performing steps 1 and 2 on pg. 26
indicator
("Animation"), press REC TIME on the remote control.
Each time REC TIME is pressed, the Recording Time
indicator appears, changing in the following order:
1/4S, 1/2S, 1S, 5S and no indication (off).
2) Release
Instead of using the Menu in step 5 on pg. 26, press
REC TIME on the remote control until the Recording
Time indicator disappears.
Time-Lapse
1) Set
Instead of performing steps 1 and 2 on pg. 26 ("Time-
Lapse"), press REC TIME and INT. TIME on the remote
control. Each time REC TIME is pressed, the Recording
Time indicator appears, changing in the following
order: 1/4S, 1/2S, 1S, 5S and no indication (off). Each
time INT. TIME is pressed, the Interval Time indicator
appears, changing in the following order: 15S, 30S,
1MIN, 5MIN and no indication (off).
2) Release
Instead of using the Menu in step 4 on pg. 26 ("Time-
Lapse"), press REC TIME and INT. TIME on the remote
control until the indicators disappear.
NOTE:
Also refer to pg. 26.
RM-V700U
(optional)
normal. Or, press STOP and then press PLAY.
37
EN
pg. 31).