Wiring Connection; Conduit Connection - LG MFL39817319 Installation Manual

Installation

Wiring Connection

1. Connect the wires to the terminals on the
control board individually according to the
outdoor unit connection.
• Ensure that the color of the wires of outdoor
unit and the terminal No. are the same as
those of indoor unit respectively.
Terminal Block in Indoor
1(L1) 2(L2)
Connected to Outdoor Unit
2. Attach the Grille onto the cabinet.
• Grasp the lower left and right side of the
Grille and engage four tabs on the top inside
edge of the chassis.
• Press the Grille toward the chassis until it
goes back into place.

Conduit connection

1. Set the connecting cable into the terminal
block of indoor unit, and tighten set screw to
lock the conduit bracket to the indoor unit.
2. Join the conduit and the conduit bracket
together.
CAUTION :
the elbow type (L-Type)
conduit.
View
18 Multi Air Conditioner
3 4
Must use
Terminal block
Connecting cable
Cable retainer
Connecting cable
Connecting cable
Lock nut
Conduit
bracket
Conduit