Menu Screen Explanations - JVC GR-DVL505 Instructions Manual

Menu Screen Explanations

FADER/WIPE
P.AE/EFFECT
EXPOSURE
W.BALANCE
REC MODE
12 BIT
SOUND
MODE
16 BIT
10X
ZOOM
40X
250X
GAIN UP OFF
AGC
AUTO
ON
TALLY
OFF
This number is necessary when connecting the camcorder to a device such as a computer
ID
using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is 06.
NUMBER
: Factory-preset
NOTES:
The " CAMERA MENU" settings are effective when the Power Switch is set to both " " and "
"REC MODE" can be set when the Power Switch is set to " " or "
Refer to "Fade/Wipe Effects" (
Refer to "Program AE With Special Effects" (
Refer to "Exposure Control" and "Iris Lock" (
Refer to "White Balance Adjustment" and "Manual White Balance Operation"
( pg. 32).
Allows you to set the video recording mode (SP or LP) depending on your
preference ( pg. 13).
Enables video recording of stereo sound on four separate channels, and is
recommended for use when performing audio dubbing (
(Equivalent to the 32 kHz mode of previous models)
Enables video recording of stereo sound on two separate channels. (Equiva-
lent to the 48 kHz mode of previous models)
When set to "10X" while using digital zoom, the zoom magnification will
reset to 10X since digital zoom will be disengaged.
Allows you to use the Digital Zoom. By digitally processing and magnifying
images, zooming is possible from 10X (the optical zoom limit), to a maximum
of 40X digital magnification.
Allows you to use the Digital Zoom. By digitally processing and magnifying
images, zooming is possible from 10X (the optical zoom limit), to a maximum
of 250X digital magnification.
Allows you to shoot dark scenes with no picture brightness adjustment.
The overall appearance may be grainy, but the image is bright.
The shutter speed is automatically adjusted (1/30 — 1/200 sec.). Shooting a
subject in low or poor lighting at 1/30 sec. shutter speed provides a brighter
image than in the AGC mode, but the subject's movements are not smooth or
natural. The overall appearance may be grainy. When the shutter speed is
automatically adjusted, "
The tally lamp comes on to signal the start of recording.
The tally lamp remains off at all times.
pg. 28, 29).
pg. 30).
pg. 31).
" is displayed.
" ( pg. 13, 34).
CONTINUED ON NEXT PAGE
25
EN
pg. 60).
".