Panasonic KX-TDE100 Installation Manual page 136

3.9.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays
When loosening/tightening the screw, do not scratch the cabinet wall with the driver shaft.
Cabinet Wall
2.
Pass the wires through the hole in the base cover, and attach the base cover to a wall using 2 screws.
Screw
Note
Two kinds of screws are included with the doorphone. Please choose the appropriate kind for your wall
type.
3.
Connect the wires to the screws located in the back cover.
4.
Re-attach the 2 halves and re-insert the screw.
136 Installation Manual
: when a doorphone plate has been fixed to the wall
: when you wish to install the doorphone directly onto the wall
To 8-pin terminal block
To 8-pin terminal block
Document Version 2011-10