Care And Maintenance - Black & Decker BDHV-5120 Instruction Manual

20” high velocity floor fan

Table of Contents

Available languages

CARE AND MAINTENANCE

Unplug the appliance before cleaning. Do not use any water to clean metal surfaces. Slightly

moisten a cloth and then wipe off the surfaces of the fan. In order to remove dust from the

protective guard, use a vacuum cleaner or remove the front of the protective guard using a

screwdriver to unscrew the securing screw on the edge of the guard. After cleaning, replace the

safety guard, and fasten the securing screw on the edge of the protective guard.

ASSEMBLY INSTRUCTIONS

Step 1

Press the button on the base bracket

Step 2

Insert the fan head into base

bracket until the button pops-up

from the hole

Table of Contents

Do you have a question about the BDHV-5120 and is the answer not in the manual?