Camera Display - JVC GR-DF450 Instructions Manual

DEMO MODE
OFF: Automatic demonstration will not take
place.
[ON]: Demonstrates certain functions such as
Program AE with special effects, etc., and can
be used to confirm how these functions operate.
Demonstration starts in the following cases:
When the Menu Screen is closed after "DEMO
MODE" is turned "ON".
With "DEMO MODE" set to "ON", if there is no
operation for about 3 minutes after the Power
Switch is set to "A" or "M".
Performing any operation during the
demonstration stops the demonstration
temporarily. If no operation is performed for more
than 3 minutes after that, the demonstration will
resume.
NOTES:
Even with "DEMO MODE" set to "ON", if a
cassette is in the camcorder, the demonstration
will not take place.
"DEMO MODE" remains "ON" even if the
camcorder power is turned off.
If "DEMO MODE" remains "ON", some functions
will not be available. After viewing demo, set to
"OFF".
PRIORITY
[LCD]: The image is displayed on the LCD
monitor when the viewfinder is pulled out while
the LCD monitor is opened.
FINDER: The image is displayed in the
viewfinder when the viewfinder is pulled out
while the LCD monitor is opened.
CAM RESET
EXECUTE: Resets all settings to the factory-
preset.
[RETURN]: Does not reset all settings to the
factory-preset.

CAMERA DISPLAY

The "n" (CAMERA DISPLAY) settings are
effective even when the Power Switch is set to
"A". However, the menu settings can be changed
only when the Power Switch is set to "M".
The "n" (CAMERA DISPLAY) settings except
"BRIGHT", "LANGUAGE", and "AUDIO LEV." are
effective only for shooting.
[ ] = Factory-preset
MENUS FOR DETAILED ADJUSTMENT
BRIGHT
pg. 17, "Brightness Adjustment Of The
Display"
ON SCREEN
LCD: Keeps the camcorder's display (except the
date, time and time code) from appearing on the
connected TV screen.
[LCD/TV]: Makes the camcorder's display
appear on screen when the camcorder is
connected to a TV.
DATE/TIME
OFF: The date/time does not appear.
[AUTO]: Displays the date/time for approx. 5
seconds when the Power Switch is set from
"OFF" to "A" or "M".
ON: The date/time is always displayed.
The date indication can also be turned on/off by
pressing the DISPLAY Button on the remote
control. ( pg. 23, 51)
TIME CODE
[OFF]: Time code is not displayed.
ON: Time code is displayed on the camcorder
and on the connected TV. Frame numbers are
not displayed during recording. (
LANGUAGE
For GR-DF470/450
[ENGLISH] / FRANÇAIS / ESPAÑOL /
PORTUGUÊS /
For GR-DF430
[ENGLISH] / FRANÇAIS / ESPAÑOL /
PORTUGUÊS /
The language setting can be changed.
( pg. 16)
AUDIO LEV.
OFF: Auxiliary microphone level indicator does
not appear.
[ON]: Displays auxiliary microphone level
indicator when optional microphone is
connected. ( pg. 8)
CLOCK ADJ.
pg. 16, "Date/Time Settings"
EN
pg. 21)
/
39