Ce Marking; Gas Council Numbers; Ecotec Pro - Vaillant ecoTEC plus 612 Instructions For Installation And Servicing

increase the flexibility. If desired, an inhibitor may be
used in the system. Guidance on the use of inhibitors is
contained in these instructions.
All boilers have a built in diagnostic system which indi-
cates the operational status of the boiler. This feature
provides key information to aid commissioning and fault
finding. The data badge is fitted to the underside of the
boiler. See text of General Requirements for installation
requirements or notes.
The Valliant ecoTEC are state-of-the-art appliances
which have been constructed in accordance with recog-
nised safety regulations. Nevertheless, danger to the life
and limb of the user or third parties can still occur or
the appliance or other material assets be damaged in
the event of improper use.
The appliance is designed to generate heat for connect-
ing to hot water central heating systems and for instan-
taneous hot water supply (ecoTEC combination boilers
only). Any other use or extended use is considered to be
use other than intended. The manufacturer/supplier is
not liable for any resulting damage.
Intended use includes the observance of the operating
and installation manual and the adherence to the inspec-
tion and maintenance conditions.
Danger!
Any incorrect use is forbidden.
The appliances must be installed by a competent person,
who is responsible for adhering to the existing regula-
tions, rules and guidelines.
1.4

CE marking

The CE marking shows that the appliances comply
with the basic requirements of the following direc-
tives:
- Gas appliances directive (90/396/EEC)
- Electromagnetic compatibility directive with threshold
class B (89/336/EEC)
- Low voltage directive (73/23/EEC)
The appliances satisfy the basic requirements of the effi-
ciency directive (92/42/EEC) as condensing appliance.
- The Gas Applaince (Safety) Regulations 1992
- The boiler (Efficiency) Regulations 1993
Vaillant Ltd. supports the Benchmark initiative.
At the rear of this guide, you will find a
Benchmark gas boiler commissioning checklist.
It is very important that this is completed cor-
rectly at the time of installation, commission-
ing and hand over to the user.
Instructions for installation and servicing ecoTEC / 839592_09
1.5

Gas council numbers

Applaince

ecoTEC pro 24

ecoTEC pro 28
ecoTEC plus 824
ecoTEC plus 831
ecoTEC plus 831 Propane
ecoTEC plus 837
ecoTEC plus 612
ecoTEC plus 615
ecoTEC plus 618
ecoTEC plus 618 Propane
ecoTEC plus 624
ecoTEC plus 630
ecoTEC plus 630 Propane
ecoTEC plus 637
Table 1.1 Gas council numbers
Introduction 1
Gas council numbers
47-044-36
47-044-30
47-044-31
47-044-32
47-044-34
47-044-33
41-044-44
41-044-45
41-044-46
41-044-51
41-044-47
41-044-48
41-044-50
41-044-49
5