Quick Review; Recording From The Middle Of A Tape - JVC GR-D340E/EK Instructions Manual

VIDEO RECORDING
20
EN
NOTES:
The time code cannot be reset.
During fast-forwarding and rewinding, the time
code indication does not move smoothly.
The time code is displayed only when "TIME
CODE" is set to "ON". (

Quick Review

Enables to check the end of the last recording.
1) Press QUICK REVIEW during the
Recording-Standby mode.
2) Tape is rewound for about several seconds
and played back automatically, then pauses in
the Recording-Standby mode for the next shot.
Distortion may occur at start of playback. This is
normal.

Recording From The Middle Of A Tape

1) Play back a tape or use Blank Search
( pg. 21) to find the spot at which you want to
start recording, then engage the Still Playback
mode. ( pg. 21)
2) Set the Power Switch to "REC" while pressing
down the Lock Button located on the switch,
then start recording.
pg. 25)