System Connections; Connection To A Personal Computer - JVC GR-D20 Instructions Manual

Connection To A Personal Computer

[A] Using USB cable (GR-D50/D40 only)
It is possible to do the following things:
Transfer still/moving images recorded on a tape to a PC.
Capture still/moving images in real-time.
Use this camcorder as a WebCam.
[B] Using DV cable
It is also possible to transfer still/moving images to a
PC with a DV connector by using software equipped
with the PC or commercially available software.
NOTES:
Refer to "SOFTWARE INSTALLATION AND USB
CONNECTION GUIDE" for the installation of the bundled
software and drivers (GR-D50/D40 only).
It is recommended to use the AC Adapter as the
power supply instead of the battery pack (
Never connect the USB cable and the DV cable
simultaneously to the camcorder. Connect only the
cable you wish to use to the camcorder.
If the PC connected to the camcorder via the USB cable
is not powered, the camcorder does not enter the USB
mode (GR-D50/D40 only).
The date/time information cannot be captured into the
PC.
Use the provided software PIXELA ImageMixer to
capture video in real-time (GR-D50/D40 only).
You can also use the camcorder for webconference by
®
using Windows Microsoft Netmeeting and signing up for
Microsoft Hotmail (GR-D50/D40 only).
Refer to the instruction manuals of the PC and Software.
The still images can also be transferred to a PC with a
DV connector-equipped capture board.
When using a DV cable, be sure to use the optional
JVC VC-VDV206U or VC-VDV204U DV cable depend-
ing on the type of DV connector (4 or 6 pins) on the
PC.
The system may not work properly depending on the PC
or capture board you are using.
When using the DV connection refer to manufacturer
instructions of your capture board for driver's installation
and operation instructions.
GR-D50/D40 only:
"ACCESSING FILES" appears on the LCD monitor
while the PC is accessing data in the camcorder or the
camcorder is transferring a file to the PC.
NEVER disconnect the USB cable while
"ACCESSING FILES" is displayed on the LCD
monitor since this can result in product damage.
[A] Using USB cable
(GR-D50/D40 only)
To USB
USB cable
(provided)
pg. 7).
To USB
connector
PC
[B] Using DV cable
8
To DV
Core filter
OR
DV cable
(optional)
Core filter
To DV
connector
PC with DV
connector

SYSTEM CONNECTIONS

!
EN
33