Web and MAC Authentication for the Series 2600/2600-PWR and 2800 Switches
Configuring the Switch To Access a RADIUS Server
3-16
Optional. Specifies an encryption key for use during
authentication (or accounting) sessions with the speci
fied server. This key must match the encryption key used
on the RADIUS server. Use this command only if the
specified server requires a different encryption key than
configured for the global encryption key, above.
The no form of the command removes the key configured
for a specific server.
For example, to configure the switch to access a RADIUS server at IP address
192.168.32.11 using a server-specific shared secret key of '2Pzo22'
HPswitch(config)# radius-server host 192.168.32.11 key 2Pzo22
HPswitch(config)# show radius
S tatus and Counters - General RADIUS Information
Deadtime(min) : 0
Timeout(secs) : 5
Retransmit Attempts : 3
Global Encryption Key :
A uth Acc t
Server IP Addr Port Por t Encryption Key
--------------- -----
192.168.32.11
1812 181 3 2Pzo22
HPswitch(config)#
Figure 3-4. Example of Configuring a Switch To Access a RADIUS Server
--- -- --------------------------------