Disk/Tape Controller Modules Supported - Motorola MVME167 Series Installation Manual

Disk/Tape Controller Modules Supported

The following VMEbus disk/tape controller modules are
supported by the 167Bug. The default address for each controller
type is First Address and the controller can be addressed by First
CLUN during commands
.DSKRD or .DSKWR.
Note that if another controller of the same type is used, the second
one must have its address changed by its onboard jumpers and/or
switches, so that it matches Second Address and can be called up by
Second CLUN.
Controller Type
CISC Single Board Computer
(MVME167)
MVME320 - Winchester/Floppy
Controller
MVME323 - ESDI Winchester
Controller
MVME327A - SCSI Controller
MVME328 - SCSI Controller
MVME328 - SCSI Controller
MVME328 - SCSI Controller
MVME350 - Streaming Tape
Controller
BDisk/Tape Controller
BH
First
CLUN
$00
$11
$08
$02
$06
$16
$18
$04
, , or , or during TRAP #15 calls
BO IOP
First Second
Address CLUN
--
$FFFFB000
$FFFFA000
$FFFFA600
$FFFF9000
$FFFF4800
$FFFF7000
$FFFF5000
B
Data
Second
Address
-- --
$12 $FFFFAC00
$09 $FFFFA200
$03 $FFFFA700
$07 $FFFF9800
$17 $FFFF5800
$19 $FFFF7800
$05 $FFFF5100
B-1