Motorola MVME167 Series Installation Manual page 142

Single board computer
Hide thumbs Also See for MVME167 Series:
Table of Contents

Advertisement

Configure and Environment Commands
A
ENV Parameter and Options
Slave Address Translation
Select #1
Slave Control #1
Slave Enable #2 [Y/N]
Slave Starting Address #2
Slave Ending Address #2
Slave Address Translation
Address #2
Slave Address Translation
Select #2
Slave Control #2
A-10
Table A-1. ENV Command Parameters (Continued)
Default
Meaning of Default
00000000
This register deÞnes which bits of the
Translation Address are signiÞcant. A
logical one "1" indicates signiÞcant
address bits, logical zero "0" is non-
signiÞcant. The non-signiÞcant bits
will come from the VMEbus address
that accesses the local resource.
Normally, MS bits will be set, down to
the size of memory to be accessed.
Default is $0.
03FF
DeÞnes the access restriction for the
address space deÞned with this slave
address decoder. Default is $03FF. See
description of VMEchip2 bits in Single
Board Computer ProgrammerÕs Reference
Guide.
Y
Yes, Setup and enable the Slave
Address Decoder #2.
FFE00000
Base address of the local resource that
is accessible by the VMEbus, as
viewed by the VMEbus. Default is the
base address of static RAM,
$FFE00000.
FFE1FFFF
Ending address of the local resource
that is accessible by the VMEbus, as
viewed by the VMEbus. Default is the
end of static RAM, $FFE1FFFF.
00000000
Works the same as Slave Address
Translation Address #1. Default is $0.
00000000
Works the same as Slave Address
Translation Select #1. Default is $0.
01EF
Works the same as Slave Control #1.
Default is $01EF.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents