This Appendix Covers; Conþgure Board Information Block - Motorola MVME167 Series Installation Manual

AConfigure and Environment

This Appendix Covers

Configure Board Information Block
CNFG [;[I][M]]
This command is used to display and configure the board
information block. This block is resident within the Non-Volatile
RAM (NVRAM). Refer to the MVME167 Single Board Computer
User's Manual for the actual location.
The information block contains various elements detailing specific
operation parameters of the hardware. The MVME167 Single Board
Computer User's Manual describes the elements within the board
information block, and lists the size and logical offset of each
element. The CNFG command does not describe the elements and
their use. The board information block contents are checksummed
for validation purposes. This checksum is the last element of the
block.
Configuring the board information block
Setting the environment to Bug/Operating System
Environment command parameters
Commands
A
A-1