Sony UPA-P100MD User Manual page 17

•
Be sure to select this box when you want to write
information to a CD-R disc. It is possible to select
either [Single session] or [Multi session].
When you select [Single session], you can only write
the images taken for one patient on a CD-R disc.
Patient
1-Grab 2-Print
3-Burn 0-Exit
Tue Jul 31 17:30
When you finish an examination (that is, when you
press [0] on the remote control keyboard), the disc
can no longer be used to write further information.
When you select [Multi session], images are written
to CD-R disc, but when you finish an examination,
the CD-R disc remains open for additional recording
sessions. In other words, you can record several
sessions consecutively (each in a different folder) for
several different patients on the same CD-R disc.
•
Be sure to select this box when using a UP-D50 or
UP-D70XR digital video printer. Leave it clear
otherwise. (The Digital Capture Unit starts faster
when this box is not selected.) This setting also
determines the layout of the images on one page
when printing.
The UP-D50 and UP-D70XR default SCSI settings
are:
• Terminator: on
• ID: 001
Refer to the appropriate printer user's guide for
details.
•
Specify a valid IP address in this box.
Warning
If in doubt as to what IP, subnet mask, or gateway
address to specify, ask your system administrator.
•
Specify the subnet mask address of your network
here.
•
If necessary, specify a gateway address here.
•
Type the number of days after which the files and
folders saved on the unit's hard disk are deleted. The
maximum number of days you can set is 60. For
examples, if you type 10 days in this box, all the files
and folders on the Digital Capture Unit hard disk are
deleted after 10 days. Users that save large numbers
of images every day should be careful of the number
of days that they set here. It should be set so that
there are never more than 5000 images on the unit's
hard disk at any one time. In other words, 5000/
(images saved per day)=maximum safe number of
days that you can set for [Expiration Time]. If you
allow too many images to accumulate on the unit's
hard disk, it will become full and further image
capture with the Digital Capture Unit will be
impossible. By default, this is 14 days.
Warning
Be careful of the value you specify here. When you
modify this setting and click [Save Config], the UPA-
P100MD deletes images older than the expiration
time. If the expiration time is set to a value lower
than the age of images that you need to keep, you will
lose those images.
Note
Be sure to back up the image files on the hard disk of
the UPA-P100MD before reaching the [Expiration
Time]. See "Managing UPA-P100MD Hard Disk
Space" for details.
•
Specify whether you want the doctor's name to be
requested every time you begin a new procedure
([Always ask]), never requested ([Never ask]), or that
the system use the default doctor name ([Use
default]).
•
Type the default doctor name to be used by the
system here. The default doctor name can be
composed of up to 18 alphanumerical characters.
•
Specify whether you want the procedure name to be
requested every time you begin a new procedure
([Always ask]), never requested ([Never ask]), or that
the system use the default procedure name ([Use
default]).
17