Advertisement
4.
Remove the dashboard center holder:
Without Ashtray:
•
Open the coin pocket lid, and remove the coin
pocket.
•
Remove the two self-tapping screws.
•
Gently pull out on the dashboard center holder
to release the three retaining tabs, unplug the
vehicle connector, and remove the dashboard
center holder.
COIN
POCKET
SELF-TAPPING
SCREW
(Reuse.)
RETAINING
TABS (3)
With Ashtray:
•
Open the lid and remove the ashtray.
•
Remove the two-self-tapping screws.
•
Gently pull out on the two retaining clips,
unplug the cigarette lighter harness connector,
vehicle connector, and illumination bulb, then
remove the dashboard center holder.
DASHBOARD
CENTER HOLDER
ASHTRAY
SELF-TAPPING
SCREW (Reuse.)
RETAINING
CLIPS (2)
4 of 9
LID
DASHBOARD
CENTER HOLDER
VEHICLE
CONNECTOR
ILLUMINATION
BULB
CIGARETTE
LIGHTER
HARNESS
CONNECTOR
VEHICLE
CONNECTOR
5.
Remove the pocket:
•
Remove the two self-tapping screws from the
lower part of the pocket panel.
•
Release the two clips and remove the pocket
panel. Set the pocket aside; it will not be used.
CLIPS (4)
SELF-TAPPING
SCREW (Reuse)
6.
Remove the two nuts and the two bolts, and pull
the navigation unit out towards you, release the
vehicle harness from the right and left vehicle
4803020B
brackets.
NUT
(Reuse.)
LEFT VEHICLE
BRACKET
(Also, remove the
clip also from the
right vehicle bracket.)
7.
Disconnect the vehicle connectors from the rear of
the navigation unit, and remove the navigation unit
from the pocket panel opening.
2730010K
AII 31211 (0510)
POCKET
PANEL
POCKET PANEL
OPENING
BOLT
(Reuse.)
NAVIGATION
UNIT
VEHICLE
HARNESS
© 2005 American Honda Motor Co., Inc. - All Rights Reserved.
4419110Y
VEHICLE
CONNECTOR
4804020Y
Advertisement
