Installation - Sony RM-B150 Maintenance Manual

Remote control unit
Hide thumbs Also See for RM-B150:
Table of Contents

Advertisement

The RM-B150 is equipped with various kinds of new functions. Depending on the camera that is connect-
ed to the unit, some functions require settings by using the menu of the RM-B150 and some functions
cannot be activated. See the following table for details.
Some functions become activated if the camera is equipped with the updated ROM. If the ROM version is
not applicable, make the settings by the menu or replace the ROM as necessary.
If the menu setting is required, refer to the operation manual supplied with the RM-B150. If ROM
replacement is required, consult your Sony service organization.
Function
BVP-900/950
Filter number
auto recognition
Yes
GAIN L/M/H select
interlocking
Yes
Iris Open/Close value
auto recognition
Yes
White
Preset
Yes
VTR
Control Start/Stop
Yes
Except above No
Camera setup menu
operation
Yes
Video monitor
output
Yes
*1: These are not functioned automatically. Perform manual settings by the menu of the RM-B150.
*2: If using these functions, check whether the ROM version for the camera/camcorder is applicable to the version shown below, or not.
If not, replace the ROM. Or perform manual settings by the menu of the RM-B150.
*3: If using these functions, check whether the ROM version for the camera/camcorder is applicable to the version shown below, or not.
If not, replace the ROM.
*4: Monitoring the video signals is enabled only for the BVP-550 series that is used together with the CA-570/530 series.
For the BVP-550 series that is used together with the CA-550/550P, or BVP-500/500P, monitoring is disabled.
*5: If using these functions, check whether the ROM version for the camcorder is applicable to the version shown below, or not.
If not, replace the ROM. The output signal is the only Y signal.
Applicable ROM Version
BVP-500/550 (IC36/AT-95 board):
HDC-700/750 (IC26/IF-569 board, IC24/SG-226 board):
HDW-700/700A (IC15, 16/IF-667 board):
RM-B150
Section 1

Installation

BVP-700/750
BVP-570
BVP-500/550
*1
Yes
*2
*1
Yes
*2
*1
Yes
*2
No
Yes
*3
No
Yes
*3
No
No
No
No
Yes
*3
No
*4
*4
Ver. 4.00 or higher
Ver. 3.00 or higher (for both ICs)
Ver. 1.24 or higher (for both ICs)
HDC-700A/750A
HDC-700/750 HDW-700/700A
Yes
*2
Yes
*2
Yes
*2
Yes
*3
Yes
*3
No
No
Yes
No
No
No
*2
*2
*2
*3
*3
*3
*3
*5
1-1(E)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents