Voice Prompt Programming - Honeywell LYNXR Installation And Setup Manual

The LYNXR Series features a quick programming mode that allows you to program the system by
responding to a series of voice prompts. The Voice Prompt Programming Guide provides you with the
information required to use this feature.
Voice Prompt Programming Keypad Functions:
The keys shown below are used to navigate through the Voice Prompt Programming Feature.
1. ESCAPE/ OFF
key: Used at any
time to exit the current menu and
return to the previous prompt.
2. ADD/ AWAY key: Used to add
sensors, or keys or save data when
entering phone or account
numbers.
3. DELETE/ STAY key: Used to
delete a sensor when in the delete
Sensors Menu.
4. SELECT/ AUX key: Used to
confirm a selection.
3 ↑ key: Used to scroll forward
5.
through menu choices.
6 ↓ key: Used to scroll backward
6.
through menu choices.
7. FUNCTION/ #
key:
Used to repeat a voice prompt. (This function cannot be used while entering phone or account numbers.)
Notes: (1) Keying in any new command will terminate the active voice prompt.
(2) If an irrelevant command is entered LYNXR will generate a long rejection beep and repeat the previous voice prompt.
(3) Phone numbers and account numbers can be left blank by pressing the
(4) LYNXR automatically saves phone and account number data once all available digits are entered.
ENTERING VOICE PROMPT PROGRAMMING
1. Power-up the control and enter the Installer Code
(4 1 1 2) + 8 8 8.
2. Once you have entered into the Voice Prompt Programming
Mode the system will announce, "Programming, use
ARROWS to scroll choices, press SELECT to accept, press
ESCAPE to quit."
Press the 6 ↓ 3 ↑ keys to scroll through the voice
or
3.
menu and follow the instructions provided.
4. The system will announce the following options:
"Add Sensors"
"Delete Sensors"
"First Central Station Phone Number"
"First Central Station Account Number"
"Second Central Station Phone Number"
"Second Central Station Account Number"
"Templates"
"Expert Programming Mode"
WWW.DIYALARMFORUM.COM

Voice Prompt Programming

1
2
3
4
WWW.DIYALARMFORUM.COM
1
OFF
ESCAPE RECORD
4
AWAY
LIGHTS ON
ADD
7
STAY
LIGHTS OFF
DELETE
*
AUX
SELECT STATUS
®
"ADD/ AWAY "
5. Follow the directions provided by each voice prompt to
make your selections.
FUNCTION/ #
The
prompt, as required.
6. When you have completed each programming procedure
the system will return to the Main Programming Menu.
EXITING VOICE PROMPT PROGRAMMING
1. Once you have returned to the Main Programming Menu,
the system will announce, "Programming use ARROWS to
scroll choices, press SELECT to accept, press ESCAPE to
quit".
Press ESCAPE/ OFF
2.
mode once you have returned to the Main Programming
Menu.
–39–
ARMED READY
2 3
VOLUME PLAY
5 6
TEST BYPASS
8 9
CODE CHIME
0 #
NO DELAY FUNCTION
key without entering any data.
key can be used to repeat a voice
to exit Voice Prompt programming
5
6
7
01009-021-V0