Table of Contents
Advertisement
Getting Started
Grip Adjustment
.
① Flip the grip belt over.
② Adjust the length of the belt.
③ Fasten the grip belt.
CAUTION:
Be sure to fasten the grip belt properly.
●
If the belt is loose, this unit may drop and result in injuries or damages.
Using the Hand Strap
When using the hand strap, loop it around your wrist.
.
Removing the Strap
.
While pressing [1], pull [2] and remove the strap.
●
Attaching the Strap
.
Push in firmly until it clicks into place.
●
12
Inserting an SD Card (NAND/SD Models)
When a commercially available SD card is inserted, recordings can still
be made to the card without stopping when the remaining recording time
on the internal memory runs out.
"Types of Usable SD Card" （A P.13）
1
Press the power button for more than 2 seconds to turn off this unit.
.
2
Open the card slot cover.
.
3
Insert an SD card.
.
CAUTION:
Make sure not to insert the card in the wrong direction.
●
It may cause damage to the unit and card.
Turn off the power of this unit before inserting or removing a card.
●
NOTE:
Recording switches automatically from one media to another and vice
●
versa after the card or memory space in the selected media is full.
"SEAMLESS RECORDING" （A P.81）
To record to the card, it is necessary to adjust media settings.
●
When no card is available, set media settings to "HDD" for recording.
"REC MEDIA FOR VIDEO (GZ-HM320)" （A P.106）
"REC MEDIA FOR IMAGE (GZ-HM320)" （A P.107）
To use cards that have been used on other devices, it is necessary to
●
format (initialize) the card using "FORMAT SD CARD" from media set-
tings.
"FORMAT SD CARD" （A P.108）
Removing the Card
Push the card inward once, then pull it out straight.
Hide quick links:
Advertisement
Table of Contents
