Troubleshooting - JVC Everio GZ-MS230 Basic User's Manual

Troubleshooting

Before requesting service, consult the following chart or the "Troubleshooting" section
in the Detailed User Guide.
If the solutions indicated in the chart do not solve the problem, consult your nearest
JVC dealer or JVC service center for instructions. Refer also to the FAQ of new
products on JVC's website. Refer also to the Q&A information of new products on
JVC's website (http://www.jvc.com).
This unit is a microcomputer-controlled device. Electrostatic discharge, external noise
and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In
such a case, reset this unit.
■ Reset this unit when it does not function properly or when "...
Error" appears on the screen.
① Turn off the power. (Close the LCD monitor.)
② Remove the AC adapter and battery pack from this unit, reattach them,
and turn on the power again.
Trouble
Trouble
POWER/CHARGE lamp
starts blinking when the
monitor is closed.
Recording cannot be
performed.
Recording stops by itself.
No date/time display.
Sound or video is
interrupted.
The battery pack is being charged.
●
Check the
●
Set to the recording mode with the
●
button.
Turn off this unit, wait for a while,
●
and turn it on again. (This unit stops
automatically to protect the circuit
when the temperature rises.)
Recording stops automatically after
●
12 hours of continuous recording.
Set "ON-SCREEN DISPLAY" in the
●
playback menu accordingly.
Sometimes playback is interrupted at
●
the connecting section between two
scenes. This is not a malfunction.
For more information, refer to the Detailed User Guide
http://manual.jvc.co.jp/index.html/
Action
/ button.
Page
P.6
P.12
P.14
-
-
-
-
23