Watching Images On Tv/Remote Control; Connecting To A Tv, Vcr Or Dvd Recorder; Playback On Tv - JVC Everio GZ-MG36E/EK Instructions Manual

Watching Images on TV/Remote Control

32
EN

Connecting to a TV, VCR or DVD Recorder

Make sure all units are turned off before connecting.
Open the cover.
AV Connector
S Connector
S-video Cable (optional)
Enables playback of even higher quality.
NOTES:
It is recommended to use the AC adapter as the power supply instead of the battery pack. (
To connect the camera to a PC, refer to SOFTWARE INSTALLATION AND USB CONNECTION
GUIDE.
This camera is designed to be used with PAL-type colour television signals. It cannot be used with a
television of a different standard.

Playback on TV

After connecting the camera to the TV in "Connecting to a TV, VCR or DVD Recorder"
( pg. 32)
1
Turn on the camera and the TV.
2
Set the TV to its VIDEO mode.
3
(Only when connecting the camera to the VCR/DVD recorder)
Turn on the VCR/DVD recorder, and set the VCR/DVD recorder to its AUX input
mode.
4
Start playback on the camera. (
NOTE:
If the aspect ratio of the video you are playing is strange and the screen size can be changed on the TV,
make adjustments on the TV.
Connect the cable so that the colours of the
terminals and connectors match.
(White: audio left, red: audio right, yellow: video)
AV Cable
(provided)
pg. 26, 30)
AV Input Terminal for TV,
VCR, or DVD Recorder
When connecting the camera to a
VCR/DVD recorder, also check the
connection between the VCR/DVD
recorder and the TV.
pg. 12)