Recording/Playback; Recording Files; Video Recording - JVC Everio GZ-HD320 Instructions Manual

RECORDING/PLAYBACK

Recording Files

Video Recording

Slide the mode switch to select
!
(video) mode.
To stop recording

Press START/STOP again.
To view the last recorded scene

A
Select while recording is paused.
$
Selecting during playback deletes that
scene.
To record a still image during video

recording
Press SNAPSHOT.
NOTE
•
The video recording mode is automatically selected when you turn off the camcorder and then
turn on again.
•
If the camcorder is not operated for 5 minutes while the power is on, it turns itself off
automatically to conserve power.
•
Do not move or shake the camcorder suddenly during recording.
If you do so, the driving sound (hum) of the hard disk may be recorded.
•
If the LCD monitor is turned upside down,
monitor is in the normal position.
1
EN
SNAPSHOT


is not displayed. Change the setting when the LCD
Press PLAY/REC to select the
recording mode.
Press START/STOP to start
recording.
You can also start/stop recording by
selecting [REC] on the LCD monitor.
(On-screen recording control)
To change the video quality
Change the settings in [VIDEO QUALITY].
To turn on the face detection mode
Select .
Approximate remaining
time for recording