Description Of Controls - Candy Alise Instructions For Use Manual

Description of controls

Fig. 1
D C
R
H I L N O P
Door handle
Programme selector with "OFF" position
"Door Security" indicator light
"Delay Start" button
"Time To End" and "Delay Start" indicator light
"Spin Selection" button
Spin speed indicator light
"Stain Blaster" button
"Allergy Care" button
"Drying Selection" button
Drying programme indicators
"Cold Wash" button
"Fast Iron" button
"Start/Pause" button
Buttons indicator light
Detergent drawer
E M G Q F
B
A
A
B
C
D
E
F
G
H
I
L
M
N
O
P
Q
R
6
Door handle
Press the finger-bar inside the door handle to open the door.
PROGRAMME selector with "OFF" position
Rotates in both directions.
The machine is turned on by
selecting a programme via the
programme selector. This status will
be indicated by the "STOP" indicator
light flashing, this light will continue
to flash until the machine has started
or the machine is returned to the
"OFF" position.
Press the "Start/Pause" button to start the selected cycle.
Once a programme is selected the programme selector remains stationary on the selected
programme till cycle ends.
Switch off the washing machine by turning the selector to "OFF".
Note:
The programme selector must be return to the "OFF" position at
the end of each cycle or when starting a subsequent wash cycle
prior to the next programme being selected and started.
DOOR SECURITY indicator light
The "Door Security" indicator light is illuminated when the door is fully closed and the machine is ON.
When "Start/Pause" is pressed on the machine with the door closed the indicator will flash
momentarily and then illuminate.
If the door is not closed the indicator will continue to flash.
A special safety device prevents the door from being opened immediately after the end of the cycle.
Wait for 2 minutes after the wash cycle has finished and the "Door Security" light has gone out
before opening the door. At the end of cycle turn the programme selector to "OFF" .
7
A
B
C