Using Ac Power - JVC 1000MKV*UN*VP Instruction Manual

ATTENTION:
Before detaching the power source, make
sure that the camcorder's power is turned
off. Failure to do so can result in a
camcorder malfunction.
Charge marker
A charge marker is provided on
the battery pack to help you
remember whether it has been
charged or not. Two colours are
provided (red and black)—you
choose which one means
charged and which means
discharged.
To AC outlet
To DC IN
connector
AC Adapter
USING THE BATTERY PACK
Perform step 1 of "CHARGING THE BATTERY PACK"
( pg. 6).
Approximate recording time (unit: min.)
Battery pack Viewfinder on
BN-V11U
BN-V12U
(optional)
BN-V20U
(optional)
BN-V400U
(optional)
( ) : when the video light is on (GR-SXM607 only)
NOTES:
Recording time is reduced significantly under the
following conditions:
• Zoom or Record-Standby mode is engaged repeatedly.
• The LCD monitor is used repeatedly.
Before extended use, it is recommended that you
prepare enough battery packs to cover 3 times the
planned shooting time.

USING AC POWER

Use the AC Adapter (connect as shown in the illustration).
NOTES:
The provided AC Adapter features automatic voltage
selection in the AC range from 110 V to 240 V.
For other notes, pg. 44.
LCD monitor on
95 80
(50) (45)
95 80
(50) (45)
150 135
(85) (75)
360 315
(205) (190)
7
EN