Table of Contents
Advertisement
72
EN
Advanced features
SYMPTOM
15. The focus does not adjust
automatically.
16. In the 5-Second mode,
recording ends before
5 seconds have elapsed.
17. Snapshot mode cannot be
used.
18. The color of Snapshot looks
strange.
19. The image taken using
Snapshot is too dark.
20. The image taken using
Snapshot is too bright.
21. White Balance cannot be
activated.
22. Wipe/Fader effects do not
work.
23. The Black & White Fader does
not work.
24. Program AE does not work.
25. Cannot record signals from a
device which is connected to
the i.LINK IN/OUT connector.
POSSIBLE CAUSES
15. • Focus is set to the Manual
mode.
• The recording was done in a
dark place, or the contrast
was low.
• The lens is dirty or covered
with condensation.
16. • The 5-Second mode is set to
"Anim." in MANUAL Menu.
17. • The Squeeze mode
(SQUEEZE) is selected.
18. • The light source or the
subject does not include
white. Or there are various
different light sources behind
the subject.
• The Sepia (SEPIA) or
Monotone (MONOTONE)
mode is activated.
19. • Shooting was performed
under backlit conditions.
20. • The subject is too bright.
21. • The Sepia (SEPIA) or
Monotone (MONOTONE)
mode is activated.
22. • The Power Switch is set to
"A".
23. • The Sepia (SEPIA) or
Monotone (MONOTONE)
mode is activated.
24. • The Power Switch is set to
"A".
25. • The connected device is not
compatible with this
camcorder.
TROUBLESHOOTING (cont.)
CORRECTIVE ACTION
15. • Set Focus to the Auto mode.
(
pg. 46)
• Clean the lens and check the
focus again. (
16. • Set "5S" to "5S" in MANUAL
Menu. (
pg. 35, 37)
17. • Disengage the Squeeze
(SQUEEZE) mode.
(
pg. 35, 38)
18. • Find a white subject and
compose your shot so that it
also appears in the frame.
(
pg. 28, 44)
• Disengage the Sepia (SEPIA)
and Monotone
(MONOTONE). (
51)
19. • Press BACK LIGHT.
(
pg. 45)
20. • Press P.AE and set
"PROGRAM AE" to
"SPOTLIGHT". (
21. • Disengage the Sepia (SEPIA)
or Monotone (MONOTONE)
mode before setting White
Balance. (
22. • Set the Power Switch to "M".
(
pg. 16)
23. • Disengage the Sepia (SEPIA)
and Monotone
(MONOTONE).
(
pg. 35, 51)
24. • Set the Power Switch to "M".
(
pg. 16)
25. • Dubbing from other devices
in MPEG2 format is possible
if the connected device is
another same model of this
unit. It is also possible to dub
in MPEG2 format from a D-
VHS VCR, if the source tape
(D-VHS) has been originally
dubbed from this digital HD
video camera in MPEG2
format.
pg. 81)
pg. 35,
pg. 50)
pg. 51)
Advertisement
Table of Contents
