Sony 700TVL User Manual page 3

Notes
Notes
Notes Notes
�
Do not make the products under great impact or stay away from
strong electromagnetic interference and vibration.
�
There are some sophisticated parts inside the camera, therefore,
during transportation and installation, please avoid the damage cause
by stress or severe vibration. For the sake of safety, please do not
switch on power before accomplishing all installation.
�
Please comply with all electrical safety standards during
operation, camera or signal transmission cable should maintain a
sufficient distance (50 meters) with high-voltage equipment or cables,
if necessary, lighting and thunder protective measures must be taken.
�
Please install the camera in well-ventilated environment.
�
Please do not make the camera face sunshine or other strong light
directly in case of any damage to the lens and the sensor.
�
The temperature and humidity range for cameras work are -10 ~
50 ℃, less than 95% separately, please do not start cameras beyond
this range.
�
To avoid lightning strikes, please make sure the installation of
power supply ground line in a good condition.
�
To prevent the equipment from damage by shower or splash of
water, please do not place the device substances such as liquid.
3