IMPORTANT SAFETY INSTRUCTIONS
d) Before connecting the appliance
to the power supply make sure that the
voltage and frequency listed on the
data plate correspond with the
household electrical supply.
This data must correspond to prevent
appliance damage. If in doubt consult a
e) Installation work and repairs
should only be performed by a qualified
technician in accordance with all
applicable codes and standards.
Repairs and other work by unqualified
persons could be dangerous.
f) Only open the housing as
described in the enclosed "Installation
diagram" and in the "Cleaning and care"
section of this manual. Under no
circumstances should any other parts
of the housing be opened. Tampering
with electrical connections or
components and mechanical parts is
highly dangerous to the user and can
cause operation faults.
g) Before discarding an old
appliance, disconnect it from the power
supply and remove the power cord to
TO REDUCE THE RISK OF A
COOKTOP GREASE FIRE:
a) Never leave surface units
unattended at high settings. Boilovers
cause smoking and greasy spillovers
may ignite. Heat oils slowly on low or
b) Always turn the hood on when
cooking at a high heat.
c) Clean the ventilation hood
frequently. Grease should not be
allowed to accumulate on the blower or
d) Use the proper pan size. Always
use cookware appropriate for the size
of the cooking area.
e) Do not flambé or grill with an
open flame beneath the hood.
Flames could be drawn up into the
hood by the suction and the baffle
filters may catch fire.