Basic Operations & Display Content; Data Dial; Cursor Types & Operations; Changing & Setting Values - Yamaha CP4 Stage Owner's Manual

Basic Operations & Display Content
Cursor Types & Operations
The following two types of cursor are used on-screen to
highlight the current selection:
 Arrow cursor
The arrow cursor ( ) flashes to the left of the currently
selected item. You can move this cursor up, down, left,
and right, depending on the current screen, using the
[ ], [ ], [ ], and [ ] buttons.
 Flashing cursor
On naming screens, the currently selected character will
itself flash on and off. You can move this cursor to the left
and right only using the [ ] and [ ] buttons.
[ ], [ ], [ ], and [ ] buttons
The [ ], [ ], [ ], and [ ] buttons can be used to move
the cursor in the corresponding direction on-screen. The
[ ] and [ ] buttons can also be used to display menu
items and to move between panes on screens containing
more than one.
Changing & Setting Values

Data Dial

The Data Dial can be turned clockwise to increase values
and vice-versa. In addition, when adjusting parameters
with a wide range of possible settings, you can turn the
Data Dial with the [SHIFT] button held down to increase
or decrease in units of 10.
[-1/NO] and [+1/YES] buttons
The [+1/YES] button increases the current setting by one
each time it is pressed; the [-1/NO] button decreases it. If
you hold down either button, the setting will change
continuously. In addition, when adjusting parameters with
a wide range of possible settings, you can press these
buttons with the [SHIFT] button held down to increase or
decrease accordingly in units of 10.
Increase
setting
Decrease
setting
Decrease setting Increase setting
by one
CP4 STAGE/CP40 STAGE Owner's Manual
by one
19