Inspection And Repair; Installation; Vacuum Booster Overhaul; Vacuum Booster - Isuzu 1999 RODEO Workshop Manual

Inspection and Repair

Visual Check
Make necessary parts replacement if cuts, nicks,
excessive wear, or other abnormal conditions are found
through inspection. Check the following parts:
f Yoke clevis
f Valve body guard
f Silencer
f Filter plate and seal assembly

Installation

1. Install plate and seal assembly.
2. Install retainer.

Vacuum Booster

The vacuum booster cannot be disassembled for repair.
Replace a defective vacuum booster with a new one.

Vacuum Booster Overhaul

POWER–ASSISTED BRAKE SYSTEM
3. Install 2 gaskets and spacer.
4. Install filter.
5. Install silencer.
6. Install valve body guard.
7. Install retainer.
8. Install lock nut and yoke clevis and tighten to the
specified torque.
Torque: 20 N·m (15 lb ft)
9. Install vacuum booster, refer to "Vacuum Booster" in
this section.
10. Install master cylinder, refer to "Master Cylinder" in
this section and after installation, perform brake pedal
check and adjustment. Refer to "Brake Pedal" in this
section.
5C–29