Isuzu 1999 RODEO Workshop Manual page 138

2A–36 POWER–ASSISTED STEERING SYSTEM
7. Loosen the inflator module fixing bolt from behind the
steering wheel assembly using a TORX
equivalent until the inflator module can be released
from steering assembly. Disconnect the yellow 2-way
SRS connector and horn lead located behind the
inflator module, then remove inflator module.
WARNING: THE INFLATOR MODULE SHOULD
driver or ALWAYS BE CARRIED WITH THE URETHANE
COVER AWAY FROM YOUR BODY AND SHOULD
ALWAYS BE LAID ON A FLAT SURFACE WITH THE
URETHANE SIDE UP.
BECAUSE A FREE SPACE IS PROVIDED TO ALLOW
THE AIR CUSHION TO EXPAND IN THE UNLIKELY
EVENT
OTHERWISE, PERSONAL INJURY MAY RESULT.
827RW070
8. Apply a setting mark (1) across the steering wheel
and shaft so parts can be reassembled in their original
position. Move the front wheels to the straight ahead
position, then use steering wheel remover J–29752 to
remove the steering wheel.
827RW073
THIS IS NECESSARY
OF ACCIDENTAL DEPLOYMENT.
827RW072
430RW021