Download  Print this page

Headlight Unit/housing Removal; Headlight Unit Installation; Tail/brake Light Bulb Replacement; Tail/brake Light Lens Removal/installation - Kawasaki EN500 Vulcan 500 LTD Service Manual

Hide thumbs


Table of Contents
Lighting System
Fit the dust cover [A] with the Top mark upward onto the
bulb firmly as shown in the figure.
After installation, adjust the headlight aim.
Right [B]
Wrong [C]

Headlight Unit/Housing Removal

Screws [A] (both sides)
Headlight Connector [A]
Headlight Unit [B]
Turn Signal Light Lead Connectors [C]
Bolts and Nuts [D]
Headlight Housing [E]

Headlight Unit Installation

Install the headlight unit so that the "TOP" mark [A] on the
lens points up.

Tail/Brake Light Bulb Replacement

Remove the tail/brake light lens.
Insert the new bulb by aligning the pins with the grooves
in the walls of the socket so that the pin closest to the bulb
base [A] is to the upper right.

Tail/Brake Light Lens Removal/Installation

Be careful not to overtighten the lens mounting screws.


Table of Contents

   Also See for Kawasaki EN500 Vulcan 500 LTD

This manual is also suitable for:

Vulcan 500 ltd

Comments to this Manuals

Symbols: 0
Latest comments:
  • Ricardo Paluan Apr 27, 2016 01:22:
    Adquiri recentemen​te uma moto vulcan 500 ano 1995. Tenho o 37 anos e iniciante no mundo motociclis​ta. Entretanto​, em razão só tempo e idade da moto, não tenho o manual do proprietá​rio, sendo este indispens