Download  Print this page

Brush Plate Inspection - Kawasaki EN500 Vulcan 500 LTD Service Manual

Motorcycle.
Hide thumbs

Advertisement

Table of Contents
Electric Starter System

Brush Plate Inspection

Using the × 1 Ω hand tester range, measure the resis-
tance between the brush plate [A] and the negative brush
[B].
If there is not close to zero ohm, the brush plate has an
open. Replace the brush plate assembly.
Using the highest hand tester range, measure the re-
sistance between the brush plate and the positive brush
holder [C].
If there is any reading at all, the brush holder has a short.
Replace the brush plate assembly.
Using the × 1 Ω hand tester range, measure the resis-
tance between the terminal bolt [D] and the positive brush
[E].
If there is a high resistance or no reading (∞), a lead is
open and the brush plate must be replaced.
Using the highest hand tester range, measure the resis-
tance between the terminal bolt [A] and the end cover [B].
If there is any reading at all, the insulation is faulty and
the brush plate must be replaced. Replace the terminal
assembly.
ELECTRICAL SYSTEM 15-51

Advertisement

Table of Contents

   Also See for Kawasaki EN500 Vulcan 500 LTD

This manual is also suitable for:

Vulcan 500 ltd

Comments to this Manuals

Symbols: 0
Latest comments:
  • Ricardo Paluan Apr 27, 2016 01:22:
    Adquiri recentemen​te uma moto vulcan 500 ano 1995. Tenho o 37 anos e iniciante no mundo motociclis​ta. Entretanto​, em razão só tempo e idade da moto, não tenho o manual do proprietá​rio, sendo este indispens