Download  Print this page

Electrical Wiring; Wiring Inspection - Kawasaki EN500 Vulcan 500 LTD Service Manual

Hide thumbs



Electrical Wiring

Wiring Inspection

Visually inspect the wiring for signs of burning, fraying,
If any wiring is in poor condition, replace the damaged
Pull each connector [A] apart and inspect it for corrosion,
dirt, and damage.
If the connector is corroded or dirty, clean it carefully. If it
is damaged, replace it.
Check the wiring for continuity.
Use the wiring diagram to find the ends of the lead which
is suspected of being a problem.
Connect an ohmmeter between the ends of the leads.
Set the meter to the × 1 Ω range, and read the meter.
If the meter does not read 0 Ω, the lead is defective. Re-
place the lead or the wiring harness [B] if necessary.


Table of Contents

   Also See for Kawasaki EN500 Vulcan 500 LTD

This manual is also suitable for:

Vulcan 500 ltd

Comments to this Manuals

Symbols: 0
Latest comments:
  • Ricardo Paluan Apr 27, 2016 01:22:
    Adquiri recentemen​te uma moto vulcan 500 ano 1995. Tenho o 37 anos e iniciante no mundo motociclis​ta. Entretanto​, em razão só tempo e idade da moto, não tenho o manual do proprietá​rio, sendo este indispens