Download  Print this page

Coupling Bearing Inspection And Lubrication - Kawasaki EN500 Vulcan 500 LTD Service Manual

Hide thumbs


Table of Contents
Sprocket, Coupling

Coupling Bearing Inspection and Lubrication

It is not necessary to remove the coupling bearing for
inspection and lubrication. If the bearing is removed, it
will need to be replaced with a new one.
Spin the bearing by hand to check its condition.
If it is noisy, does not spin smoothly, or has any rough
spots, it must be replaced.
Examine the bearing seal for tears or leakage.
If the seal is torn or is leaking, replace the bearing.
Pack the bearing with good quality bearing grease. Turn
the bearing around by hand a few times to make sure the
grease is distributed uniformly inside the bearing.


Table of Contents

   Also See for Kawasaki EN500 Vulcan 500 LTD

This manual is also suitable for:

Vulcan 500 ltd

Comments to this Manuals

Symbols: 0
Latest comments:
  • Ricardo Paluan Apr 27, 2016 01:22:
    Adquiri recentemen​te uma moto vulcan 500 ano 1995. Tenho o 37 anos e iniciante no mundo motociclis​ta. Entretanto​, em razão só tempo e idade da moto, não tenho o manual do proprietá​rio, sendo este indispens