Download  Print this page

Advertisement

Table of Contents
Drive Chain
After staking, check the staked area of the link pin for
cracks.
Measure the outside diameter [A] of the link pin and link
plates width [B].
Link Pin Outside Diameter
5.45 ∼ 5.85 mm (0.21 ∼ 0.23 in.)
Standard:
5.6 ∼ 6.0 mm (0.22 ∼ 0.24 in.) (EN500-C9
∼)
Link Plates Outside Width
17.35 ∼ 17.50 mm (0.683 ∼ 0.689 in.)
Standard:
17.45 ∼ 17.60 mm (0.687 ∼ 0.693 in.)
(EN500-C9 ∼)
If the reading exceeds the specified length, cut and rejoin
the chain again.
Check:
Movement of the Rollers
Adjust the drive chain slack after installing the chain (see
Drive Chain Slack Adjustment).
FINAL DRIVE 10-11

Advertisement

Table of Contents

   Also See for Kawasaki EN500 Vulcan 500 LTD

This manual is also suitable for:

Vulcan 500 ltd

Comments to this Manuals

Symbols: 0
Latest comments:
  • Ricardo Paluan Apr 27, 2016 01:22:
    Adquiri recentemen​te uma moto vulcan 500 ano 1995. Tenho o 37 anos e iniciante no mundo motociclis​ta. Entretanto​, em razão só tempo e idade da moto, não tenho o manual do proprietá​rio, sendo este indispens